Original Stone Coated Roofing Sheets and Tiles in Nigeria

EDGES PROJECTIONS LTD (RC 1293300 ) , We are your dependable home for ORIGINAL New Zealand Anti Rust stone coated step tiles roofing sheet in Nigeria, reply this tread for more details, for supplies and installation services.

Available Designs per square meter
–
Classic =N= 2,600

Bond =N= 2,600

Shingle =N= 2,800

Roman =N= 3,000

Milano: =N=2,900

Ridge cap =N=1,200 Per meter

Valley Gutter =N=1,200 per meter

B.B.C =N=1,200 Per meter

facial board =N=1,200 Per meter

treated nails =N=1,000 per KG

sealant =N=5,000 A PACK

installation =N= 180 per square meter

Frequently Asked Questions About Stone Coated Roofing System

How long has Stone-Coated Steel roofing been around?

Stone coated steel roofing occurred during World War II when tar and sand were used to cover galvanized steel bunkers.
After the war, the practice was commercialized and the first roofs were produced. Stone coated steel roofs have been protecting
buildings for close to 5oyears, but the product technology today bears little resemblance to early practices due to advances
in the chemistry of coatings.

2. Will a Steel roof make my Home Hot?

No. A properly vented steel roof system moves air both between the shingles and the underlying
deckas well as moving air from vents under the decking. Heated air is allowed to dissipate through the ridge line as cooler
air is drawn through eave vents. Reduced energy bills can result from airflow both under
and over the decking.

3. Can you walk on a steel roof?

Yes. Some care must be exercised while walking on the roof, but note that roofers walk all over the shingles during
the installation process.
4. How do the granules stay bonded to the steel?
Specially graded, non-oiled stone chips, produced by ISP Corporation, are used for all stone coated products.
The finely graded, non-oiled stone granules ensure long-term adhesion to the steel substrate and are embedded in a
UV resistant acrylic polymer for lasting bond to the steel substrate.

5. Will a Steel roof rust?

The steel substrate is protected from corrosion by layers of metallic and polymer coatings. Stone coated utilizes an advanced
metal composite developed by BIEC International and introduced in 1973 as aluminum-Zinc coated steel.
The composite improved earlier metallic coatingsby applying an aluminum-zinc alloy to the steel in a continuous hotdip process.

The aluminum creates an inert barrier coat while enhancing the long-term performance of zinc and its
ability to protect breaks in the coating. Galvalume coated steel has repeatedly been shown in industry studies, conducted over the
last 20 Years, to out perform the corrosion resistance of other coated metals.
This is why stone coated roof system is referred to as “The final Roofing System”, and is backed up with a
50year limited warranty.

6. Does the color fade?

Stone coated uses the same stone granules used by asphalt
shingle manufactures for over 50 years so history demonstrates that fading is not a problem.

7. How long does it take to install a steel roof?

Usually only a few days. The complexity of the building’s roof scape is the primary
factor in determining the time required Complex roofs require more time
than basic designs.

8. What is the installed weight of a steel roof in comparison to other products?

PRODUCT WGT.PER SQ. (1-Sq.ft)
Steel Roofing 125lbs
Standard (3tab) Asphalt Shingles 190-215lbs
Wood Shake/Shingle* 250-300lbs
Heavy Weight Laminated Asphalt Shingles 290-430lbs
Clay/Concrete Tiles* 900-1200 lbs

*Note that the weights for cedar, clay and concrete products are all dry weight increase when wet.

9. Are steel roofs more susceptible to lightning strikes?
Steel roofing is no more susceptible to lighting than other roofing materials.It has been demonstrated that
lightning strikes most frequently the highest points of terrain. Where concerns exist, lightning rods can be installed on roofs
that are the highest point of point of surrounding.